Fire Hose Reel
Fire Hose Reel with Semi-Rigid Hose – Global-Mark Approved
Fire Hose Reel with Semi-Rigid Hose – CE Approved
Product Description:
fire hose reels provide a very effective fire fighting facility with a continuous supply of water available immediately. The construction and performance of fire hose reel with semi-rigid hose ensures suitable installation in buildings and other construction works for use by the occupants. The fire hose reels are manufactured in both manual and automatic version.
Characteristics
-
The fire hose reels are capable of rotating in one plane (fixed type)or rotating in more than one plane with mounting on one of the following: swinging arm, swinging pipe or swinging door in manual and automatic version.
-
The automatic fire hose reels will open fully within 3 revolution of the reel.
-
The nozzle have SHUT, JET and SPRAY control settings
-
The minimum flow rate of hose reels in JET and SPRAY setting is 41 L/MIN. at 0.6 MPa (6 bar) pressure
-
Setting in chrome platedrotary nozzle is 53Lpm at 0.6 Mpa (6 bar) pressure.
-
The effective throw range of discharge at 0.2 MPa (2 bar) pressure is 10 mtrs. in JET setting.
-
The reel discs are painted RED with printed instructions to use label.
Operating Structures:
AUTOMATIC HOSE REELS:
-
Pull out the hose and then water flow will start within 3 rotations.
-
Open nozzle, adjust to spray or jet as required.
-
Aim nozzle at base of fire.
-
After use, close the nozzle and rewind the hose, ensuring that it is properly wound around the hose reel (not overlapping side plates). Open the nozzle to drain water from the hose and then close the nozzle on completion.
MANUAL HOSE REELS:
-
Open the main valve fully.
-
Pull out the hose.
-
Open nozzle, adjust to spray or jet as required.
-
Aim nozzle at base of fire.
-
After use, close the nozzle, turn off the main valve, rewind the hose, ensuring that it is properly wound around the hose reel (not overlapping the side plates). Open the nozzle to drain water from the hose and then close the nozzle on completion.
Lock Shield Valve
Product Description:
Lock Shield Valve is usually installed where unauthorized operation has to be avoided. A typical application of this valve is installing these at inlet pipe to the hose reel where it can be opened only by key and key kept by maintenance or fire safety department.
Features:
-
Solid Wedge, non-rising stem, screwed in bonnet
-
Valves are manufactured in accordance to BS 5154 series B.
-
Service temperature -10 to +66°C.
-
Pressure rating is PN 20.
-
End connection is BSPT threaded to BS21.
Semi-Rigid Reel Hose
Product Description:
Semi-rigid reel hoses are suitable for use infixed fire fighting system. The hoses are available in size of 19 mm and 25 mm inside diameter. The hoses are flexible so that it can be rolled and kept on a drum.
The hose are intended for use at a maximum working pressure of 12 bar (1.2 MPa) and temperature range -20°C to +60°C at ambient temperature condition in non aggresive or non-corrosive atmosphere. The semi-rigid reel hoses are manufactured to comply with BSEN 694:2001 standards.
Features:
-
BSI Kitemark & LPCB certified.
-
Materials for inner lining and cover of hose is plasticized PVC compound.
-
High tensile textile polyester yarn is used for reinforcement of hose.
Fire Hose Reel with Semi-Rigid Hose – Kitemark/LPCB Approved
Product Description:
Fire hose reels provide a very effective fire fighting facility with a continuous supply of water available immediately. The construction and performance of fire hose reel with semi-rigid hose ensures suitable installation in buildings and other construction works for use by the occupants. The fire hose reels are manufactured in both manual and automatic version to comply to EN 671-1:2001 standard with semi-rigid hose complying with EN 694:2001 standards.
Features:
-
BSI Kitemark and LPCB certified.
-
The fire hose reels are capable of rotating in one plane (fixed type)or rotating in more than one plane with mounting on one of the following: swinging arm, swinging pipe or swinging door in manual and automatic version.
-
The automatic fire hose reels will open fully within 3 revolution of the reel.
-
The nozzle have SHUT, JET and SPRAY control settings
-
The minimum flow rate of hose reels in JET and SPRAY setting is 41 L/MIN. at 0.6 MPa (6 bar) pressure
-
Setting in chrome platedrotary nozzle is 53Lpm at 0.6 Mpa (6 bar) pressure.
-
The effective throw range of discharge at 0.2 MPa (2 bar) pressure is 10 mtrs. in JET setting.
-
The reel discs are painted RED with printed instructions to use label.
Operating Instructions:
AUTOMATIC HOSE REELS:
-
Pull out the hose and then water flow will start within 3 rotations.
-
Open nozzle, adjust to spray or jet as required.
-
Aim nozzle at base of fire.
-
After use, close the nozzle and rewind the hose, ensuring that it is properly wound around the hose reel (not overlapping side plates). Open the nozzle to drain water from the hose and then close the nozzle on completion.
MANUAL HOSE REELS:
-
Open the main valve fully.
-
Pull out the hose.
-
Open nozzle, adjust to spray or jet as required.
-
Aim nozzle at base of fire.
-
After use, close the nozzle, turn off the main valve, rewind the hose, ensuring that it is properly wound around the hose reel (not overlapping the side plates). Open the nozzle to drain water from the hose and then close the nozzle on completion.
