Hoses & Accessories
Single Jacket Hose – UL Listed
Product Description:
Single jacket fire hose consists of 100% polyester plain-woven synthetic and natural rubber linings. This fire hose has very good resistance to aging and abrasion. The light fire hose is suitable for normal situation. Single jacket hose made of high tenacity polyester staple and polyester filaments. Lining is natural rubber. Jacket is plain. There is a special adhesion between the jacket and the rubber.
Fire Hose Rack
Product Description:
Fire hose racks are designed for use in controlling incipient fire by building occupant use and conform to NFPA 14 standards for CLASS II service. The Fire Hose Racks are manufactured to comply FM standard Class 2141.
Characteristics
-
Hose rack frame material made of Stainless Steel Gr.304.
-
Provides an immediate water source for fire suppression.
-
Easy operational for single person.
-
Hose rack is designed to hold the hose with movable pins for easy & quick operation at the time of Emergency.
-
An automatic release mechanism allows water to flow through the hose after removal of the hose and nozzle.
-
Standard assemblies include:
-
Angle Valve or pressure reducing type valve (UL/FM approved)
-
Hose rack frame
-
Hose rack nipple
-
Hose coupling
-
Fire Hose – 30 Mtr. (UL Listed)
-
Fog nozzle. (UL and/or FM approved)
-
-
Hose rack frames are RED (RAL 3000) Polyester powder coated, oven baked.
PU Lined Hose
SYNTHETIC, SINGLE JACKET FIRE HOSE
(250 PSIG / 1725 kPa Service Pressure)
Hose interior is all synthetic, light weight, and are UL approved.
Construction & Features
-
The hose is of single jacket construction.
-
The jacket is made with high tenacity filament polyester yarn in both the warp and weft directions, to provide maximum strength to weight ratio.
-
The hose is resistant to chemicals and petrol products, rot & mildew, hydrolysis, and resist deterioration due to exposure UV-rays and ozone.
Performance
-
The hose, in all sizes, have minimum service, test, and burst pressures as specified in the technical chart.
-
The hose have a maximum flow with minimum friction loss.
-
The hose have no defects, dirt, knots, lumps or other irregularities affecting the performance of the hose.
-
The hose is resistant to kinking and remain flexible to -65°F(-53°C).
-
Twisting and warping are at least 100% better than required, by the applicable NFPA standards.
Single Jacket Hose – Duralex, UL Listed
Product Description:
Outer and Inner Layers
Specially formulated rubber, extruded through the tubular fabric. Minimum load loss thanks to its smooth liner surface. High temperature resistance.
Intermediate Textile Fabric Reinforcement
Jacket manufactured with tubular weave with high-tenacity polyester thread. Free of defects such as broken threads, knots, etc
Characteristics
-
Excellent resistance to abrasion and to intensive professional use.
-
High resistance to oil, gasoline and wide range of chemicals.
-
Highly resistant to both contact and radiant heat.
-
Lightweight hose, remaining flexible even at low temperatures (-30°C).
-
Easy to handle and wind up thanks to its great flexibility.
-
High breaking resistance thanks to its special textile construction.
-
No maintenance or drying required.
Single Jacket Hose – Kitemark & LPCB Approved, Type 2
Product Description:
Single jacket fire hose consists of an impermeable elastomeric lining, a synthetic fibre reinforcement and externally applied elastomeric coating to the reinforcement. Delivery hoses are non-percolating lay flat type used in fire fighting purpose. Hoses are suitable for use with couplings with the requirements of BS 336:2010 standards. Hose is intended for use at working pressure not exceeding 15 bar. Delivery hose are manufactured to comply BS 6391: 2009 Standards.
Features:
-
BSI KITEMARK & LPCB Certified.
-
Light weight and flexible.
-
Hose belongs to Type 2 with Elastomeric lining, Synthetic fibre reinforcement and elastomeric coating on the reinforcement.
-
Hose give good protection against the absorption of liquids and resistance of the reinforcement.
-
Anti rot and anti twist.
-
Hose with couplings are wound by Galvanized mild steel / SS wire.
Double Jacket Hose – UL Listed
Product Description:
-
This durable, double jacket hose is constructed of 100% high tensile strength polyester yarns, both wrap and filler, and lined with a high-tech EPDM tube. Its engineered design guarantees minimum weight with maximum durability and flexibility. The UL Listed Double Jacket Fire Hose and its assemblies under this specifications shall be constructed with superior quality materials, manufactured in accordance with National Fire Protection Association (NFPA) 1961 standard.
-
Outstanding abrasion resistance.
-
Tough, dependable and lightweight attack hose.
-
A stripe of a contrasting color running the full length of the hose can be provide into the jacket to meet NFPA recommendations for pump panel.